Thanks for visiting Welding Types. Please remember to bookmark this page Rod Dia. If you found what your looking for, then don"t forget to click an appreciation button above for this post.
 (3077W) DELRIN 1 3/4"DIA 12"LONG ROD WHITEFOR SALE US $10.00 
|
 NYLON ROD 144 PCS (384 FT) .375" Dia x 32 " NATURAL TYPE 6/6 ZYTEL 101 15410- US $222.00
|
 KYNAR ( PVDF ) ROD 3" Dia X 1 Foot 15409-4 US $335.00
|
 UHMW Plastic Rod 1 1/2" dia (oversized) X 7" for lathe stock, parts, repairs etc US $8.95
|
 (30706B) DELRIN 3/8" DIA 6" LONG ROD BLACK FOR SALE US $1.00
|
 (30706W) DELRIN 3/8" DIA 6" LONG ROD WHITE FOR SALE US $1.00
|
 (3071B) DELRIN 1/2"DIA12"LONG ROD BLACK FOR SALE US $3.10
|
 ~ Polyethylene Rod White 4-3/4" Dia x 63" US $350.00
|
 (30716B) DELRIN 1/2" DIA 6" LONG ROD BLACK FOR SALE US $1.75
|
 (30736W)DELRIN 3/4"DIA 6"LONG ROD WHITE FOR SALE US $2.50
|
 (30736B)DELRIN 3/4"DIA 6"LONG ROD BLACK FOR SALE US $3.00
|
 (3074B) DELRIN 1" DIA12" LONG ROD BLACK FOR SALE US $5.50
|
 (30746W) DELRIN 1" DIA 6" LONG ROD WHITE FOR SALE US $2.75
|
 (30756B) DELRIN 1 1/4"DIA 6"LONG ROD BLACK FOR SALE!!!! US $4.00
|
 (30766W) DELRIN 1 1/2" DIA 6" LONG ROD WHITE FOR SALE US $5.00
|
 (30776W) DELRIN 1 3/4"DIA 6" LONG ROD WHITE FOR SALE US $6.00
|
 (30786W) DELRIN 2" DIA 6 " LONG ROD WHITE FOR SALE! US $7.00
|
 Glass Filled Nylon Round Rod .250" dia. x 48" long US $9.77
|
 (30906W) DELRIN 2 1/4" DIA 6" LONG ROD WHITE FOR SALE! US $10.50
|
 (30906B) DELRIN 2 1/4" DIA 6" LONG ROD BLACK FOR SALE! US $11.75
|
 (3090B) DELRIN 2 1/4" DIA 12" LONG ROD BLACK FOR SALE! US $20.50
|
 (30796B) DELRIN 2 1/2" DIA 6" LONG ROD BLACK FOR SALE! US $16.75
|
 (30796W) DELRIN 2 1/2" DIA 6" LONG ROD WHITE FOR SALE! US $14.75
|
 (3091B) DELRIN 2 3/4"DIA 12"LONG ROD BLACK FOR SALE US $33.00
|
 (30916B) DELRIN 2 3/4"DIA 6"LONG ROD BLACK FOR SALE US $19.75
|
 (30916W) DELRIN 2 3/4"DIA 6"LONG ROD WHITE FOR SALE US $17.50
|
 (30766B) DELRIN 1 1/2" DIA 6" LONG ROD BLACK FOR SALE US $6.00
|
 (30716W) DELRIN 1/2" DIA 6" LONG ROD WHITE FOR SALE US $1.50
|
 (30776B) DELRIN 1 3/4"DIA 6" LONG ROD BLACK FOR SALE US $7.00
|
 (30746B) DELRIN 1" DIA 6" LONG ROD BLACK FOR SALE US $3.75
|
 (3075W) DELRIN 1 1/4"DIA12"LONG ROD WHITE FOR SALE!!!! US $5.00
|
 DU PONT VESPEL ROD SP21M 5" DIA BY 1' LONG US $2,800.00
|
 (3091W) DELRIN 2 3/4"DIA 12"LONG ROD WHITE FOR SALE US $29.35
|
 (3071W) DELRIN 1/2"DIA12"LONG ROD WHITE FOR SALE US $2.98
|
 Clear Acrylic Plexiglass Rod 3/4" dia (1 pc) 11-7/8 Ext US $3.69
|
 Natural Acetal / Delrin rod 7/8 dia - 1 ft Bushing US $5.50
|
 RAMEX PLASTIC ROD UHMW-PE 2" DIA US $19.95
|
 RAMEX PLASTIC ROD UHMW-PE 1 1/2" DIA 4 1FT PIECES US $19.95
|
 .390" DIA x 17" ROD URETHANE / POLYURETHANE 90 A DARK BLUE US $10.00
|
 1-5/8" DIA X 16" ROD URETHANE / POLYURETHANE 95 A RED US $23.00
|
 ACETRON ACETAL 2 1/2" DIA X 2" LONG ROD BAR SHEET DISC US $6.25
|
 (30786B) DELRIN 2" DIA6 " LONG ROD BLACK FOR SALE! US $8.00
|
 ACETRON ACETAL 2 1/2" DIA X 6" LONG ROD BAR SHEET DISC US $17.50
|
 ACETRON ACETAL 2 1/2" DIA X 12" LONG ROD BAR SHEET DISC US $30.00
|
 SIMONA PE-HWST 5/8" DIA X 8" POLYETHYLENE PLASTIC ROD US $1.75
|
 SIMONA PE-HWST 5/8" DIA X 12" POLYETHYLENE PLASTIC ROD US $2.50
|
 Clear Acrylic Plexiglass Rod 1" dia (1 pc) 11-7/8 Ext US $6.99
|
 SIMONA PE-HWST 5/8" DIA X 24" POLYETHYLENE PLASTIC ROD US $4.00
|
 (3073)W DELRIN 3/4"DIA12"LONG ROD WHITE FOR SALE US $4.00
|
 Acetal Delrin 570 GF Rod 20% glass 3/4" dia, 18.25" lg US $15.00
|
 1 PC PVC ROD 4-1/2" DIA BY 2.465" LONG US $15.00
|
 1 PC PVC ROD 5" DIA BY 3-1/4" LONG US $20.00
|
 (3015)POLYCARBONATE ROD1 1/4" DIA 12" LONG US $12.50
|
 9.5" DIA. 48" LONG BLACK UHMW ROUND ROD STOCK US $620.00
|
 3.5" DIA.X 60" GRAY PVC PLASTIC ROUND ROD STOCK US $115.00
|
 ACETRON ACETAL 3-1/2" DIA X 2" LONG ROD BAR SHEET DISC US $11.35
|
 ACETRON ACETAL 3-1/2" DIA X 1" LONG ROD BAR SHEET DISC US $5.88
|
 ACETRON ACETAL 3-1/2" DIA X 4" LONG ROD BAR SHEET DISC COST INCLUDES SHIPPING!! US $27.00
|
 ACETRON ACETAL 3-1/2" DIA X 6" LONG ROD BAR SHEET DISC US $34.00
|
 ABS PLASTIC ROD/DISC 5" DIA x 1" LONG US $11.00
|
 ABS PLASTIC ROD/DISC 5" DIA x 2" LONG US $21.00
|
 Black Acetal / Delrin rod 1 " dia - 1 ft Bushing US $6.00
|
 (3077B) DELRIN 1 3/4"DIA 12"LONG ROD BLACK FOR SALE US $11.00
|
 1PC BLACK TEFLON ROD 15% GRAPHITE 4" DIA X 11-1/2" LONG US $100.00
|
 Clear Acrylic Plexiglass Rod 1" dia (20 pc) 11-7/8 Ext. US $58.99
|
 Clear Acrylic Plexiglass Rod 1" dia x 11-7/8 (10 pcs) US $29.98
|
 Urethane 90A Rod. 3" Dia. 36" Long US $190.00
|
 1" DIA. x 12" LONG, TEFLON, TFE,PLASTIC ROD STOCK US $20.00
|
 Purple Acrylic Rod 5/8" dia (72" long) (5 pieces) US $50.00
|
 Polycarbonate Rod 3 pcs .4375" dia x 27" CNC (02R) US $12.80
|
 Delrin virgin black rod 2'' dia x 1.75'' Made in USA CNC (0.2A) US $12.80
|
 SS Rod Fill Tube Dia: 1/8" 10976 52-1626 US $19.99
|
 (1972)PVC ROD 5" DIA WHITE X 12" LONG IN THIS SALE US $65.00
|
 (3019)POLYCARBONATE ROD 3/8" DIA 12" LONG US $2.50
|
 5/8" Dia. X 12" URETHANE / POLYURETHANE 50 A BLACK ROD US $10.00
|
 3 3/8" DIA LDPE POLYETHYLENE 12" LONG PLASTIC ROD US $37.00
|
 3 3/8" DIA LDPE POLYETHYLENE 2" LONG PLASTIC ROD US $6.00
|
 3 3/8" DIA LDPE POLYETHYLENE 3" LONG PLASTIC ROD US $9.00
|
 3 3/8" DIA LDPE POLYETHYLENE 4" LONG PLASTIC ROD US $12.00
|
 3 3/8" DIA LDPE POLYETHYLENE 6" LONG PLASTIC ROD US $18.00
|
 Clear Acrylic Plexiglass Rod 1-1/2" dia (1 pc) 11-7/8 US $10.74
|
 Clear Acrylic Plexiglass Rod 1/2 dia (5 pc) 11-7/8 Ext. US $5.69
|
 (3073)B DELRIN 3/4"DIA12"LONG ROD BLACK FOR SALE US $5.00
|
 (3074W) DELRIN 1"DIA12"LONG ROD WHITE FOR SALE US $5.00
|
 (3004)DELRIN BLACK ROD 7" DIA X 12" LONG IN THIS US $192.00
|
 (3069B) DELRIN1/4" DIA 12" LONG ROD BLACK FOR SALE!!!!! US $1.00
|
 VESPEL ROD 3/8" Dia. Dupont SP-1 Polyimide US $695.00
|
 Black Acetal / Delrin rod 1.97" (50mm) dia - 1 ft US $14.99
|
Rod Dia
Lathes Faq
More Lathesquestions please visit : MachineryFAQ.com
I work surrounded by a shop and own a undergo brake lathe, and don't hold the brochure, does anyone know where on earth to win one?
I've worked in a shop for about a year, and hold never seen the manual for our brake lathes, i be going to clean them up, so i asked my boss for the manuals,...
I would approaching to know what the junk mail PLB stand for when concerned next to a PLB metal spinning lathe.?
As far as I can make out, "PLB" is also used for other metal working machines, not only spinning lathe, and one and only in connection next to the model number, like PLB 300, PLB 1200, PLB 985, PLB...
Iam starting to turn spectator sport call and want to buy a lathe chuck to turn the bell finale of the ring. which one?
Iam looking for something that will hold a 1 1/2 square piece of wood to turn the bell end of the call. can anyone suggest a correct lathe chuck that is reasonably priced? lam looking I...
Ideas For A Metal Work Lathe?
Im currently working on a lathe in school and i hold no more ideas of what to make....ive made bullet keychains, baseball bat, shifting knob for my car...im out of ideas, do you own any for me? how about some aluminum or steel motorcycle grips. Turn them to a required diameter then drill or...
If you own a lathe you can answer this?
Ok long story as short as i can make it. i have a 3/8" iron rod cut into 1" length and i have to drill a 8mm hole in it deceased center the whole way through them. ""it's for tattoo device coil cores cause i know your wondering" I have a...
Im give or take a few to buy a lathe to sort bat. Who could i trade them to? Would it be concrete to put up for sale them to the pros?
Impossible to sell them to the pro's unless you have some proof they are in reality worth buying. You could try and sell them to some minor league...
I'm looking for a bowl turning rest attachment for a Coronet Major lathe. Can anyone backing please?
hobbie craft or ebay check out www.leevalley.com they hold lots of wood turning and lathe stuff. www.rockler.com if they don't have it, perhaps they could direct you to who does.
I'm looking for the best standard and price on a 13X40 or a14X40 gear team leader metal lathe?
I looked at alot of lathes, but not sure of the lathes quality. If I know the quality, Ican engender a better choice on buying one!! Thanks The basic, time tested, bottom line, rule is -- you bring back what you pay...
I'm trying to find a cheap mini lathe?
I'm looking for a cheap mini lathe. Any info will be gladly accepted! Maybe a website, or a rough guide price so I don't bring back ripped off! Thanks for looking try placing a ad on E-BAY and the price collection you are willing to pay okay. here are not that many...
I'm trying to find the year on a warner and swasey lathe.?
it is a No. 4, 12 speed turrett lathe, model 1100. i believe the serial number is 379963. i have it in the piece of equipment shop i work in and i know it is old, possibly from the 1930's? any relief would be appreciated. A lot of...
In buying a used lathe what should I look for.?
I've never used a lathe before. The one I will be checking out is a Craftsman older model. Also, where on earth should I look for the tools? i bought an prehistoric craftsman lathe and my only concern is that is uses mt1 drives and most everything very soon uses...
In lathe contrivance headstock i want spindle speed 100 rpm output near have motor rpm 1440. please know me gear
in lathe machine headstock i want spindle speed 100 rpm output next to having motor rpm 1440 so please let me know spindle gear dia., shaft gear & dia., Driving pulley dia. and motor pulley dia. should i fit. ">...
Info on threading on a lathe (Goodway GW-1660)?
I am having a hard time finding info on how to thread on a Goodway GW-1660. I inevitability instructions. Just a link will help or a book I can directive. Any point in the right direction will be great. Thank You! First, you will need to know what threading is. Then, know...
Iraq if lathe a hell closing, if be aligned have not invaded as would be Iraq today at the hand of the dictator?
Please review you question and rewrite it. I read it over and over and I make neither brand heads nor tails of it. 'Iraq if lathe a hell last'? What?
Is a metal shed any biddable for a wood lathe or is condensation a bg problem?
You will get a lot of condensation and I would not recommend departing any elect rial equipment in a metal shed Source(s): experiance Metal sheds tend to be a little cold surrounded by the winter and if you put a calor gas heater in...
Is anyone looking to buy or go parts to a Franklin Foundry 37" Wood Lathe?
I have one with the instructions guide, but I need the foot piece, the holder pieces and the long screw. I believe I have everything else. ALOHA, i'm looking for this type of lathe or close, is that your put in on ebay.... i need...
Is at hand a three chin chuck attachment available for my Hardinge lathe?
I presently work in a small machine shop, and lend a hand manage the Lathe Dept. We currently use 4 very ancient Hardinge Lathes that don't have 3 jaw chucks, but to some extent, use varying 5c collets to hold the parts, bar stock, etc. 5c collets...
Is collet chuck of cnc lathe adjectives domestic device obligation to do any protection when uninhabited run or spindle turn?
Chuck at our cnc machine is use to hold the product and turn for cutting. Thus, at hand is nothing in chuck when domestic device is stop. Can any one tell me that the accuracy of contraption can be effect...
Is here a disused assignment within Spain for a Lathe Machine Operator and Setter?
Im ANGELO T. LOPEZ a Lathe Machine Opeator and Setter, currently employed as part time instructor in ****** ORiental State University here contained by the Philippines. I would like to work in Spain relateecstaticy field of specialization. Can you help me on this? You could apply...
Is in attendance a trellis site which will show me how to turn a wood turning lathe into a metal turning lathe?
Well, the only way to do what you're asking is to trade-in your wood-working lathe for a discount on a "real" lathe. The are numerous considerations why this cannot be done, some of them being: 1. Stiffness (metal...
Is in attendance an potent style to cut my own store at home? does anybody create small story adjectives lathes?
How about a CD burner?It's cheaper and most stores haven't sold vinyl since the delayed 80's.There is digital editing software to record with and much easier to work near.I have 40 LP's at home and can't find the kind of...
Is in that an decisive instrument to cut my own documents at home? does anybody assembly small copy adjectives lathes?
Who would care if you could? Today, publish as MP3, CD, or streaming audio. You could take home equipment to do it crudely. But you're better off searching for someone near the equipment to do it for you. No one...
Is it easier to turn rotors near an on saloon brake lathe or to purloin them rotten?
I'm wondering what kind of machine most brake specialty shops use. I'd guess they use doesn`t matter what is fastest. Is it easier to set up an on-car lathe or to the remove the rotor? Almost every shop today turns the brake rotors...
Is it ok that I take a bunch of sparks while turning down 5250 carbon steel w/ a carbide cutter on a lathe?
Ok I am taking off about .080-.090" respectively pass and I am running at 1250 RPM and turning down 5150 carbon steel that was roast treated with a carbide insert cutter. No, you should never see sparks...
Is it undisruptive to Haul a 1750 Lb. South Bend Lathe within a 1/2 Ton Chevy Pickup?
Might be going to get an old size 14-1/2 - 16 South Bend Lathe. we conjecture it weighs about 1740 pounds. Should it walk on a trailer or in the back of the pickup? 2000 Chevy 1500 Not if you value your nouns....
Is near a trellis site which will show me how to turn a wood turning lathe into a metal turning lathe?
Don't think almost it. It is, essentiall, not feasible. If you are looking to do proper metal lathe work including boring, turning and threading then you necessitate to buy the correct machine. A wood lathe doesn't have the "beef"...
About the Author
MachineryFAQ.com
If you are looking for a different item here are a list of related products on Welding Types, please check out the following:
